Burnt or undercooked meals are a thing of the past. Even the most amateur of kitchen hands can produce safely cooked dishes with this nifty little in-oven timer. Let the DOT constantly monitor your food so you’re freed up to tackle other tasks. The alarm will instantly tell you when it’s ready.
- Super simple to use – only 2 buttons (Up & Down)
- Set the alarm temperature and it’ll beep when that temperature is reached
- Replaceable oven-safe probe with 1.2m cable heat resistant to 370°C
- Sleek, modern design that’s ergonomically comforting
- Splash-proof, molded-in seals to survive even the messiest cook!!
Insert the probe into your food, close the oven door, preset your alarm temperature with the only two buttons available and the DOT will beep when that temperature is reached. Turn the alarm off by touching either the Up or Down key. No fuss. No problem.
Water resistant to IP65 standards, the DOT is durable among all home kitchen environments.
Combine the DOT with the Gourmet Thermometer and you’ll have the best foundation tools for all your culinary adventures.
Peek Concepts is the official distributor of the DOT, ChefAlarm and Gourmet Thermometer in Hong Kong.
Does the entire DOT go into the oven?
No. The oven-safe probe goes into the oven inserted into your food. The display unit either sits on your counter-top or magnetically affixed to your oven door. The two are connected via a thin stainless steel braided cable which is designed to slip between your oven and oven door whilst maintaining its seal. The cable is 1.2m long and is heat resistant to 370°C.
Can I use my DOT to monitor the temperature of liquid in my saucepan?
Yes, but an optional saucepan clip will need to be purchased. This attaches your probe to the side of your saucepan or wok. It is perfect for making sure that your oil is at the correct temperature before deep-frying, controlling the temperature of your sauces or for cooking candy or sugar syrups.
Does the DOT alert me when the temperature falls below a certain level?
No. The DOT only alerts you when the current temperature rises above the alarm level. For a falling temperature alarm, see the ChefAlarm.
Are the probes replaceable?
Yes, we sell replacement and additional probes. We find it useful to have an additional probe when cooking two different foods in the same oven. You can then choose which probe to connect to your Dot without opening the oven door.
|Measurement Range||-50 to 300°C (-58 to 572°F)|
|Accuracy||±1°C (±1.8°F) from -20 to 120°C (-4 to 248°F)
±2°C (±3.6°F) from -50 to -20°C / 120 to 200°C (-58 to -4°F / 248 to 392°F)
±3°C (±5.4°F) otherwise
|Response Time||Around 5 seconds depending on probe type|
|Temperature Display||°C or °F – user selectable|
|Probe||replacable, Ø3.5 x 114 mm fast response with reduced tip with 1.2m stainless steel braided cable, resistant to 370°C (700°F), thermistor sensor|
|Case Material||ABS plastic|
|Temperature Alarm||User selectable max temperature alarm|
|Water Resistance||IP 65, water resistant, excluding probe connector|
|Power||Battery 2 x AAA (included)|
|Dimensions||20 x Ø80mm|
|Warranty||One-year manufacturer’s warranty, 6-months for the replaceable probe|
|Country of Origin||Made in China, Supplied from the UK by ETI Ltd|